Fluke 789/773

$0.00

In stock

Compare
SKU: NSKU1540 Category:

Bundle Highlights

  • Measure 4-20 mA signals without breaking the loop with the 773 mA ClampMeter. Also, source or measure 4-20 mA and 1-5 or 0-10 V dc signals to test analog I/O
  • Measure any analog process or automation signal and source mA signals with the 789 ProcessMeter
  • Measure inputs and outputs of motors and drives safely with the CAT IV 600V rated 789 ProcessMeter

>

Fluke 789 Features

  • 24 V loop power supply
  • HART mode setting with loop power (adds 250 ohm resistor)
  • 100% larger dual display
  • 1200 ohm drive capability on mA source
  • Enhanced backlight with two brightness settings
  • Improved battery power with four AA batteries
  • 0-100% mA Span Check buttons to toggle between 4 and 20 mA
  • Infrared I/O serial port compatible with FlukeView Forms
  • V 2.1 Software (available Feb. 2003)
  • 5 V dc measurement capability on the 4 V dc range for precise 1-5 V measurements
  • Externally accessible fuses for easy replacement
  • DMM designed to meet 1000 V IEC 1010 Cat III standards
  • Precision 1000 V, 440 mA digital multimeter
  • Measure ac and dc volts
  • AC and dc voltage accuracy: 0.05 % dc current accuracy, 1 uA resolution to 30 mA
  • Simultaneous mA and % of scale readout
  • True-rms ac voltage measurement
  • Frequency measurement to 20 kHz
  • Min/Max/Average/Hold/Relative modes
  • Diode Test and Continuity Beeper
  • 20 mA dc current source / loop calibrator / simulator
  • Simultaneous mA and % of scale readout
  • Manual Step (100 %, 25 %, Coarse, Fine) plus Auto Step and Auto Ramp
  • Externally accessible battery for easy battery changes V overload protection on V, ohms, frequency, mA (backed-up by 440 mA 1000 V fuse)
  • Process Meter

>

Fluke 789 Includes

  • TL71 Premium Test Lead Set
  • AC72 Alligator Clips
  • Four AA alkaline batteries (installed)
  • Users Manual
  • Quick Reference Guide

>

If you need more time in your busy day take a good look at the Fluke 773 mA Clamp Meters. It’s designed to save you time, and money, by eliminating time wasting activities. Now you can troubleshoot and repair 4-20 mA loops without breaking the loop or bringing down the system.

Fluke 733 Features

  • Best in class 0.2 % accuracy
  • 0.01 mA resolution and sensitivity
  • Measure 4 to 20 mA signals without ”breaking the loop”
  • Measure mA signals for PLC and control system analog I/O
  • Dual backlit display with both mA measurement and percent of 4 to 20 mA span
  • Measurement Spotlight illuminates hard to see wires in dark enclosures
  • Detachable clamp with extension cable for measurements in tight locations
  • Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
  • Automatically change the 4 to 20 mA output for remote testing
  • Power saving features, auto-off, backlight timeout extend battery life
  • Hold function captures and displays changing measurements
  • Measure 4 to 20 mA signals with in-circuit measurement
  • Simultaneous mA in-circuit measurement with 24V loop power for powering and testing transmitters
  • Source 4 to 20 mA signals for testing control system I/O or I/Ps
  • mA output linear ramp or 25% step output
  • DC voltage measurement to verify 24V power supplies or voltage I/O signals
  • Source DC voltage to test input devices that accept a 1-5V or 0 to 10V signals
  • Scaled mA output provides a continuous mA signal that corresponds to the 4 to 20 mA signal measured by the mA clamp
  • mA in/out: simultaneously measure the mA signal with the clamp and source a mA signal
  • Voltage output linear ramp or 25% step output

>

Fluke 733 Includes

  • Four AA alkaline batteries (installed)
  • Soft carrying case
  • TL75 test leads
  • AC 72 detachable clip
  • TL 940 mini hook test leads
  • Instruction sheet
  • Hanging tool with hook and loop strap

Brand

Fluke

Main Menu

Fluke 789/773